PVDF refers to the coating with fluorine resin as the main film-forming substance; Also known as fluorocarbon paint, fluorine paint, fluorine resin paint and so on. Among all kinds of coatings, fluorine resin coatings have particularly superior properties due to the introduction of fluorine element electronegativity and strong carbon-fluorine bond energy. Weather resistance, heat resistance, low temperature resistance, chemical resistance, and has a unique non-viscosity and low friction. After several years of rapid development, fluorine coatings have been widely used in various fields of construction, chemical industry, electrical and electronic industry, machinery industry, aerospace industry and household goods.
Special performance
(1) Excellent corrosion resistance - thanks to excellent chemical inertia, paint film resistance to acid, alkali, salt and other chemicals and a variety of chemical solvents, to provide a protective barrier for the substrate; The film is tough - high surface hardness, impact resistance, buckling resistance, good wear resistance, showing excellent physical and mechanical properties.
(2) maintenance-free, self-cleaning - fluorocarbon coating has very low surface energy, surface dust can be cleaned by rain, excellent hydrophobicity (maximum water absorption rate is less than 5%) and oil repellent, minimal friction coefficient (0.15-0.17), will not adhere to dust and scale, good anti-fouling.
(3) Strong adhesion - in copper, stainless steel and other metals, polyester, polyurethane, vinyl chloride and other plastics, cement, composite materials and other surfaces have its excellent adhesion, basically showing that it should be attached to any material characteristics. High decorative - in the 60 degree gloss meter, can reach more than 80% of the high gloss.
(4) Long weather resistance - the coating contains a large number of F-C bonds, which determines its super stability, non-pulverizing, non-fading, service life of up to 20 years, and has better performance than any other class of coatings. Excellent constructability - two-component packaging, long storage period, convenient construction.
Zinc coating: 40 g/㎡ to 275 g/㎡,
Top surface: 15 - 20 micron polyester + 5 micron primer
Back surface: 5 - 7 micron, or 7-8 micron polyester + 5 micron primer.
Color: According to RAL Card or Clients' requests.
Coil Weight: max. 13 MT,
Coil ID: 508mm/610mm.
With or without protective film on the top side.
Categories of paint: polyester/silicon modified polyester (SMP)/PVDF
Thickness: 0.18-1.20mm
Width: 700-1250mm
Minimum order: 50MT per size
